Facing a stalled issue is very common in torrent clients due to their P2P (Peer-to-Peer) nature. Typically, files are downloaded directly from a server. However, in P2P environments, files are downloaded from various users’ uploaded parts. Interruptions in the downloading process for a variety of reasons can often lead users to encounter this issue. The stalled error may occur if the server from which you are downloading the file shuts down or ceases to provide the file.

How to Troubleshoot Stalled Download Issues in qBittorrent? - 1

In some instances, you might be asked for payment to resume downloading. The issue may also arise if the seeders sharing the file stop or exit the network, making it impossible to download the file. If your download remains stalled even after attempting to force resume, the solutions provided below will help you overcome this error.

This issue has several potential causes. It is frequently encountered due to incorrect settings configured in qBittorrent . Additionally, using a VPN or having misconfigured network settings can also lead to this problem. This guide covers all scenarios that could contribute to this issue.

Restarting the PC or router is a common troubleshooting technique that can resolve the stalled issue and is recommended before trying any other solution. Additionally, ensure there is sufficient space for the torrent file you are attempting to download. Once these steps are completed, proceed with the following solutions.

1. Turn off Validate HTTPS Tracker Certificates

This feature, when enabled, validates HTTPS Trackers and web seeds, helping to establish a secure connection. However, it can also contribute to stalled issues as it adds an extra security layer that complicates downloading via qBittorrent.

  1. Navigate to qBittorrent Settings by clicking the Gear icon at the top.
  2. Select Advanced from the left pane.
  3. Locate and uncheck the option Validate HTTP Tracker Certificates .
  4. Click Apply , then OK . Subsequently, check if you can resume downloading.

2. Change Ban Client After Consecutive Failures to 0

If utilizing the Web UI of qBittorrent, adjusting Ban Client After Consecutive Failures from 5 to 0 can prevent unauthorized users from accessing your web UI and remedy the stalled issue. To implement this change, follow these steps:

  1. Open Settings from the top.
  2. From the left pane, select Web UI . Here, change the Ban Client after consecutive failures to 0 .
  3. Afterward, verify if the issue persists.

3. Configure Proxy settings

Proxy settings serve as an intermediary between the user and the server. Within qBittorrent settings, a proxy server option is available. Using a proxy server can cause stalled issues in qBittorrent, so it is highly recommended to select None in the proxy settings as detailed below.

  1. Access Settings and go to Connection from the left pane.
  2. Select None for the Proxy server type to remove any existing proxy settings.
  3. Click Apply , then OK .
  4. Confirm whether the stalled issue has been resolved.

4. Configure qBittorrent Settings Correctly

qBittorrent includes numerous settings, making it difficult to pinpoint the cause of the issue. This method provides screenshots of the optimal qBittorrent settings. Ensure your settings match those in the screenshots provided.

  1. First, access qBittorrent Settings and select RSS from the left pane.
  2. Ensure that Enable auto-downloading of RSS torrents is selected.
  3. Proceed to Advanced on the left and adjust your settings to match those shown in the screenshots.
  4. Apply the changes, click OK , and then check if the stalled issue has been resolved.

5. Reset TCP/IP

Problems with TCP/IP (Transmission Control Protocol/Internet Protocol), which facilitates communication over the network, may be responsible for the issue. Resetting TCP/IP is advised in such instances.

Furthermore, resetting network settings is also recommended. Misconfigured network settings can lead to stalled issues in qBittorrent.

  1. Press the Win key and type Command Prompt .
  2. Right-click on it and select Run as administrator .
  3. Enter the following commands sequentially to reset Winsock, TCP/IP, and network settings. netsh winsock reset netsh int ip reset netsh advfirewall reset ipconfig /flushdns ipconfig /release ipconfig /renew
  4. Verify if the issue has been resolved.

6. Delete qBittorrent from Appdata

The qBittorrent folder in Appdata, which stores user settings and cache files, can sometimes become corrupted, resulting in various error messages. Hence, deleting the cache data from the local Appdata folder is recommended.

  1. Right-click the Start Menu and select Run .
  2. Type %localappdata% and press Enter to open the folder.
  3. Delete the qBittorrent folder.
  4. Reopen qBittorrent and check for the issue.

Lastly, if none of the provided solutions are effective, consider reinstalling the qBittorrent application. This action will ensure any corrupted files causing the issue are eliminated.

How to Fix “Printer is in an error state” Issue?

The error “ WinRAR Error: Next Volume Is Required ” usually appears when you’re extracting a multi-part RAR archive and WinRAR can’t find (or can’t correctly identify) the next file in the sequence . This often happens when a volume is missing , stored in a different folder , or renamed in a way that breaks the archive’s expected order .

How to Troubleshoot Stalled Download Issues in qBittorrent? - 2

In this guide, we’ll go over the most reliable fixes confirmed by affected users, along with what each method is doing behind the scenes so you can choose the right one for your situation.

Important: To extract multi-volume archives, you should always start extraction from the first file in the set. This is usually file.part1.rar , or (in older sets) the main .rar file that comes before .r01 , .r02 , and so on.

1. Download and Place the Missing RAR File

WinRAR needs all parts of a multi-volume archive to complete extraction. This error usually appears when one of the volumes in a set like .part2.rar , .r01 , .r02 , .001 , and similar naming formats is missing . Downloading the missing volume and placing it in the same folder as the other parts allows WinRAR to continue extracting normally .

  1. Look at the error message or review the list of archive parts in the folder.
  2. Identify which volume is missing (for example, part2.rar , .r02 , .001 , etc.).
  3. Go back to the website or source where you downloaded the archive.
  4. Locate and download the exact missing file using the same naming format as the others.
  5. Make sure the new file name matches the pattern of the rest. Example: If you have file.part1.rar and file.part3.rar , the missing one must be file.part2.rar .
  6. Move the downloaded missing volume into the same folder as the other archive parts.
  7. Confirm that all parts are in a single folder before extracting.
  8. Right-click the first file in the series (usually part1 or the main .rar file) and select Extract Here or Extract to Folder .
  9. WinRAR should now detect all volumes and continue extraction normally .

2. Manually Browse & Select the Next Volume

Use this method only if the next volume already exists , but WinRAR is failing to detect it automatically. This can happen due to incorrect naming , the file being in a different location , or a temporary file access issue. Manually browsing helps WinRAR locate the correct volume and resume extraction without interruption .

  1. Right-click the first file in the series (usually .rar or part1.rar ) and select Extract Here or Extract to Folder .
  2. When WinRAR cannot find the next volume, it will show the “ Next Volume Is Required ” message.
  3. A small window will appear, allowing you to manually select the next volume .
  4. Use the file explorer window to locate the folder where the other archive parts are saved.
  5. Select the next part based on the naming order (example: select file.part2.rar after file.part1.rar ).
  6. Make sure the selected file matches the naming format of the archive (no extra characters like (1) and no mismatched numbering).
  7. WinRAR will resume extraction using the selected volume .
  8. If additional volumes are missing or stored separately, WinRAR may prompt you again. Repeat the same process until extraction completes.

3. Rename the RAR files in Order

WinRAR relies on a proper naming sequence (such as file.part1.rar , file.part2.rar , file.part3.rar ) to extract multi-volume archives. If a file is named incorrectly, contains extra characters, or is out of order, WinRAR may fail to locate the next volume and show this error. Renaming the files correctly helps WinRAR follow the sequence and extract the archive without interruptions .

Note: Renaming only changes the file name , not the file contents. The goal is to restore the correct sequence so WinRAR can detect the next volume.

  1. Go to the folder where all the RAR files are saved.
  2. Make sure all parts of the archive are present and stored in the same folder .
  3. Check how the parts are currently named . Common patterns include:
file.part1.rar, file.part2.rar, file.part3.rar
file.rar, file.r01, file.r02, file.r03
  1. Look for files that don’t match the expected numbering pattern (for example, file.part01.rar , file.part1(1).rar , or unrelated names).
  2. Rename each file so it follows the same order without extra characters or mismatched numbering. Example:
Incorrect: file.part1.rar, file.part3.rar, file.part2(1).rar
Correct: file.part1.rar, file.part2.rar, file.part3.rar
  1. Make sure the text before the number is exactly the same for all files.
  2. Only the last part number should change.
  3. Right-click the first file in the series (usually part1.rar or the main .rar file) and select Extract Here .
  4. WinRAR should now recognize the sequence and continue extraction normally .

If you still get the same prompt: the archive set is likely incomplete (a part was never downloaded or was removed), or one of the volumes is corrupt and must be re-downloaded from the original source.