How To Fix ‘Nsc.Exe

Norton antivirus users may encounter an “NSC.exe Bad Image” error that prevents them from launching the application. This error can also appear during a scan, causing the process to be terminated.

There are quite a few reasons why this error can occur. The main ones include runtime errors in Norton, a wrong installation, or an outdated version.

The easiest way to fix this issue is by running the LiveUpdate in Norton to update your antivirus to its latest version. Another way is to disable fast startup if you’re using Windows 8 or Windows 10.

There are two more methods apart from the ones mentioned above, and I will list the steps for all of them.

1. Run Norton Autofix

Norton Autofix detects and automatically fixes any problems with your Norton applications. It should be your first step whenever an NSC.exe error occurs.

Here’s how you can run it:

1. Open your Norton application.
2. Click ‘Open’ in the ‘My Norton’ window, next to ‘Device Security.’

1. In the main window of the product, click Help .
2. Now select Get Support .
3. Now the Norton Autofix w indow will open, and the scan will begin.
4. When the issue is resolved, click on Close .

2. Run Norton LiveUpdate

LiveUpdate is the option through which you can update your Norton products. Norton releases multiple patches for every version, and running LiveUpdate is the only way to install them.

If any of your Norton Security versions are displaying this error, then it is more likely that they are outdated. The bad image error primarily appears in v22.22.7.14, but it can also occur in the latest v22.23.5.106 if you haven’t installed the most recent patches.

Here’s how to run Norton LiveUpdate on different platforms:

On Windows

1. Open Norton Security .
2. Click LiveUpdate in the My Norton window under Device Security .

1. Click OK after the LiveUpdate finishes.

1. If you don’t see the “Your Norton product has the latest updates” message, then run LiveUpdate until you do.
2. Once it appears, close Norton and restart your PC .

Turn on Norton Automatic LiveUpdate (Windows)

If the Automatic LiveUpdate option is turned on, you will not have to worry about manually updating the application or encountering NSC.exe errors. All the new patches will install automatically once this option is enabled.

Here’s how to do that:

1. Open Norton and click Open next to Device Security .
2. In the main window, Go to Settings .
3. Now navigate to Antivirus > Updates .
4. Turn on the Automatic LiveUpdate option.
5. Click on Apply .
6. Click on Close .

On Mac

1. Open Norton Security .
2. Click LiveUpdate in the My Norton window next to or under Device Security .
3. Once completed, click on View Summary and check the latest installed updates.

On Android

1. Launch Norton 360 on your smartphone.
2. Tap the three-lined menu icon on the top left.
3. Tap on Run LiveUpdate under the LiveUpdate section.

On iOS

1. Launch the App Store.
2. Tap on your Profile icon.
3. Tap Update next to Norton 360.
4. Once the update finishes, launch the app.

3. Disable Fast Startup

Programs such as Norton Security and others require the system to completely shut down and restart in order for their running files to be updated. If fast startup is enabled, the system’s saved state will be loaded, and there won’t be a complete restart.

A brief method involves right-clicking on your Start Menu button and selecting Restart. This action will shut down the system and restart it without entering a hibernation state, which will help you update Norton and counter the NSC.exe errors.

Here are the steps to disable fast boot or startup in Windows 8/8.1 and 10:

1. Open the Control Panel and select Large icons in the View by: menu.
2. Click on the Power Options icon.

1. On the left-side menu, select “Choose what the power buttons do” .

1. Click on “Change Settings that are currently unavailable” under the Define power buttons section .

1. Select Yes in the UAC prompt if it pops up.
2. Uncheck the box that says “Turn on fast startup” under the Shutdown settings section .
3. Finally, click on Save Changes and close the window.

4. Run the SFC Scan

If the Norton error originates from a corrupted file, then running the SFC scan will automatically solve the problem. It will detect all the faulty files and fix or replace them.

The issue might be that some of your Norton files are not working properly, causing runtime errors to pop up. Therefore, it is always a good idea to run an SFC scan .

Here’s how to do that:

1. Click on the Start menu .
2. Type cmd .
3. Select Run as Administrator to open the Command prompt.
4. Paste the command below before hitting Enter: SFC /scannow

1. Afterward. wait for Windows to detect and fix the problems .
2. Once done, close the command prompt window.
3. Launch Norton again and see if the bad image error occurs again or not.

5. Disable 0patchLoaded.dll injection into NSC.exe

Disabling the injection of 0patchLoaded.dll will eliminate any errors displayed by the NSC executable file. One way to achieve this is by using the registry editor, but it can be more time-consuming. Therefore, as an alternative, below are the commands through which you can accomplish the same task:

1. Open Command Prompt again with the Run as administrator option.
2. Hit Enter after pasting each command: reg add HKEY_LOCAL_MACHINE\SOFTWARE\0patch /v ExcludeModules /t REG_SZ /d “NSc.exe” /f reg add HKEY_LOCAL_MACHINE\SOFTWARE\0patch\CallbackKeys\UnloadLoaderDll /v Counter /t REG_DWORD /d %random%%random% /f net stop 0patchService net start 0patchService

Lastly, open Norton again and you won’t see any error.

How to Fix “Printer is in an error state” Issue?

The error “ WinRAR Error: Next Volume Is Required ” usually appears when you’re extracting a multi-part RAR archive and WinRAR can’t find (or can’t correctly identify) the next file in the sequence . This often happens when a volume is missing , stored in a different folder , or renamed in a way that breaks the archive’s expected order .

In this guide, we’ll go over the most reliable fixes confirmed by affected users, along with what each method is doing behind the scenes so you can choose the right one for your situation.

Important: To extract multi-volume archives, you should always start extraction from the first file in the set. This is usually file.part1.rar , or (in older sets) the main .rar file that comes before .r01 , .r02 , and so on.

1. Download and Place the Missing RAR File

WinRAR needs all parts of a multi-volume archive to complete extraction. This error usually appears when one of the volumes in a set like .part2.rar , .r01 , .r02 , .001 , and similar naming formats is missing . Downloading the missing volume and placing it in the same folder as the other parts allows WinRAR to continue extracting normally .

1. Look at the error message or review the list of archive parts in the folder.
2. Identify which volume is missing (for example, part2.rar , .r02 , .001 , etc.).
3. Go back to the website or source where you downloaded the archive.
4. Locate and download the exact missing file using the same naming format as the others.
5. Make sure the new file name matches the pattern of the rest. Example: If you have file.part1.rar and file.part3.rar , the missing one must be file.part2.rar .
6. Move the downloaded missing volume into the same folder as the other archive parts.
7. Confirm that all parts are in a single folder before extracting.
8. Right-click the first file in the series (usually part1 or the main .rar file) and select Extract Here or Extract to Folder .
9. WinRAR should now detect all volumes and continue extraction normally .

2. Manually Browse & Select the Next Volume

Use this method only if the next volume already exists , but WinRAR is failing to detect it automatically. This can happen due to incorrect naming , the file being in a different location , or a temporary file access issue. Manually browsing helps WinRAR locate the correct volume and resume extraction without interruption .

1. Right-click the first file in the series (usually .rar or part1.rar ) and select Extract Here or Extract to Folder .
2. When WinRAR cannot find the next volume, it will show the “ Next Volume Is Required ” message.
3. A small window will appear, allowing you to manually select the next volume .
4. Use the file explorer window to locate the folder where the other archive parts are saved.
5. Select the next part based on the naming order (example: select file.part2.rar after file.part1.rar ).
6. Make sure the selected file matches the naming format of the archive (no extra characters like (1) and no mismatched numbering).
7. WinRAR will resume extraction using the selected volume .
8. If additional volumes are missing or stored separately, WinRAR may prompt you again. Repeat the same process until extraction completes.

3. Rename the RAR files in Order

WinRAR relies on a proper naming sequence (such as file.part1.rar , file.part2.rar , file.part3.rar ) to extract multi-volume archives. If a file is named incorrectly, contains extra characters, or is out of order, WinRAR may fail to locate the next volume and show this error. Renaming the files correctly helps WinRAR follow the sequence and extract the archive without interruptions .

Note: Renaming only changes the file name , not the file contents. The goal is to restore the correct sequence so WinRAR can detect the next volume.

1. Go to the folder where all the RAR files are saved.
2. Make sure all parts of the archive are present and stored in the same folder .
3. Check how the parts are currently named . Common patterns include:

file.part1.rar, file.part2.rar, file.part3.rar
file.rar, file.r01, file.r02, file.r03

1. Look for files that don’t match the expected numbering pattern (for example, file.part01.rar , file.part1(1).rar , or unrelated names).
2. Rename each file so it follows the same order without extra characters or mismatched numbering. Example:

Incorrect: file.part1.rar, file.part3.rar, file.part2(1).rar
Correct: file.part1.rar, file.part2.rar, file.part3.rar

1. Make sure the text before the number is exactly the same for all files.
2. Only the last part number should change.
3. Right-click the first file in the series (usually part1.rar or the main .rar file) and select Extract Here .
4. WinRAR should now recognize the sequence and continue extraction normally .

If you still get the same prompt: the archive set is likely incomplete (a part was never downloaded or was removed), or one of the volumes is corrupt and must be re-downloaded from the original source.