uTorrent is a BitTorrent client software with over 150 million users across the globe. It is made to allow peer-to-peer file sharing between its users, it uses the BitTorrent protocol to transfer files from one peer to another. It consists of peers, seeds, and leaches. Peers and seeds are the uploaders while leaches are the downloaders.

Error: Access is denied, (WriteToDisk) - 1

Error: Access is denied, (WriteToDisk)

A lot of users on the uTorrent forums reported that most versions after the update 3.4.2, give a vague error when trying to download a torrent. The error says that access to disk has been denied and that the torrent can’t be downloaded. The error could occur while a torrent is in progress.

What causes uTorrent to give “access is denied (write to disk)” error?

Before we try and find a solution, we first have to determine the cause of this problem. Here are the most frequent causes.

  • uTorrent not having administrative privileges : Most of the time the error where the torrent says that it can’t write to disk is because it is not given administrator privileges. To fix this, all you would have to do is to give administrator privileges to uTorrent and it will start downloading again.
  • Folder not granted access : In some cases, users reported that the folder in which a torrent is being downloaded is not giving access to uTorrent, it is somehow set to read-only. To fix these issues you would either have to remove the read-only property of that folder or just create a new folder and download your torrents there.
  • An internal bug that stops the download : There are some chances that a bug in the uTorrent is responsible for this behavior. Some users got the problem fixed when they tried resetting the download location through the uTorrent client.

Not to worry, the following methods will allow you to find and fix the cause of this problem.

Method 1: Granting administrative privileges to uTorrent

In order for an application to work properly on windows, it must be granted administrative privileges. The same is true for uTorrent. In most cases, the “access is denied” error is caused because the uTorrent doesn’t have the required privileges. To fix this you could just run it as an administrator, but then you would have to run it as administrator every time you start it. To permanently run it as an administrator, before continuing, make sure you have set up your account as an administrator .

  1. Open the Start menu and search for uTorrent . Open the file location of uTorrent
  2. Once it appears in the search, right-click on it and open its file location by clicking on Open file location . This will take you to the uTorrent’s shortcut folder.
  3. Right-click on the uTorrent’s shortcut and again click on Open file location .
  4. Now once you are in the root directory of uTorrent, right-click on the uTorrent.exe and click Properties .
  5. Go into the Compatibility tab and check the Run this program as an administrator tick box. Tick the Run this program as an administrator tick-box
  6. Also, click on the “ Run this Program in compatibility mode for ” option and select “Service Pack 3” from the dropdown.
  7. Click Apply and then click OK . Now start the client and see if the error is gone or not.

Method 2: Unchecking the read-only property of the download folder

If the first method didn’t work for you, then the error might be caused due to the fact that the folder in which you are downloading your torrent has its Read-only property checked. You will have to create a new folder and un-tick its Read-only property to get rid of this error.

  1. To create a new folder, right-click anywhere and then hover the pointer over the New option and then click Folder . Create a New Folder
  2. Once the folder is created rename it to your needs and right-click on it and then open its properties by clicking on Properties .
  3. Under the General tab, untick the Read-only (Only applies to files in the folder) . Untick the Read-only tick-box
  4. Now click on Apply and then click on OK . It might take some seconds to apply the changes.
  5. Now try downloading your torrent again and only use this folder as your download folder for uTorrent.

Method 3: To reset the download folder from the torrent settings

Now, this method is similar to the previous one, there is a bug in the uTorrent that doesn’t allow it to recognize the folder in which it has started downloading, the folder is there but still, it gives the write error.

  1. Right-click on the torrent that is displaying the error message: Access is denied (write to disk) .
  2. Hover the mouse pointer over Advanced . Now select “ Set download location” . Set the download location
  3. Next, you will have to re-select the same folder that was used before or select a new folder. Now click OK .
  4. Now right click on the torrent again and select Start . See if this fixed the error. Restart the torrent

Method 4: Redownload Torrent

Sometimes you might need to redownload your torrent from the site you got it from in order to rectify this issue. Torrent files can often contain corrupted or misconfigured data which can lead to this particular issue while trying to download.

How to Fix “Printer is in an error state” Issue?

The error “ WinRAR Error: Next Volume Is Required ” usually appears when you’re extracting a multi-part RAR archive and WinRAR can’t find (or can’t correctly identify) the next file in the sequence . This often happens when a volume is missing , stored in a different folder , or renamed in a way that breaks the archive’s expected order .

Fix: uTorrent access is denied - 2

In this guide, we’ll go over the most reliable fixes confirmed by affected users, along with what each method is doing behind the scenes so you can choose the right one for your situation.

Important: To extract multi-volume archives, you should always start extraction from the first file in the set. This is usually file.part1.rar , or (in older sets) the main .rar file that comes before .r01 , .r02 , and so on.

1. Download and Place the Missing RAR File

WinRAR needs all parts of a multi-volume archive to complete extraction. This error usually appears when one of the volumes in a set like .part2.rar , .r01 , .r02 , .001 , and similar naming formats is missing . Downloading the missing volume and placing it in the same folder as the other parts allows WinRAR to continue extracting normally .

  1. Look at the error message or review the list of archive parts in the folder.
  2. Identify which volume is missing (for example, part2.rar , .r02 , .001 , etc.).
  3. Go back to the website or source where you downloaded the archive.
  4. Locate and download the exact missing file using the same naming format as the others.
  5. Make sure the new file name matches the pattern of the rest. Example: If you have file.part1.rar and file.part3.rar , the missing one must be file.part2.rar .
  6. Move the downloaded missing volume into the same folder as the other archive parts.
  7. Confirm that all parts are in a single folder before extracting.
  8. Right-click the first file in the series (usually part1 or the main .rar file) and select Extract Here or Extract to Folder .
  9. WinRAR should now detect all volumes and continue extraction normally .

2. Manually Browse & Select the Next Volume

Use this method only if the next volume already exists , but WinRAR is failing to detect it automatically. This can happen due to incorrect naming , the file being in a different location , or a temporary file access issue. Manually browsing helps WinRAR locate the correct volume and resume extraction without interruption .

  1. Right-click the first file in the series (usually .rar or part1.rar ) and select Extract Here or Extract to Folder .
  2. When WinRAR cannot find the next volume, it will show the “ Next Volume Is Required ” message.
  3. A small window will appear, allowing you to manually select the next volume .
  4. Use the file explorer window to locate the folder where the other archive parts are saved.
  5. Select the next part based on the naming order (example: select file.part2.rar after file.part1.rar ).
  6. Make sure the selected file matches the naming format of the archive (no extra characters like (1) and no mismatched numbering).
  7. WinRAR will resume extraction using the selected volume .
  8. If additional volumes are missing or stored separately, WinRAR may prompt you again. Repeat the same process until extraction completes.

3. Rename the RAR files in Order

WinRAR relies on a proper naming sequence (such as file.part1.rar , file.part2.rar , file.part3.rar ) to extract multi-volume archives. If a file is named incorrectly, contains extra characters, or is out of order, WinRAR may fail to locate the next volume and show this error. Renaming the files correctly helps WinRAR follow the sequence and extract the archive without interruptions .

Note: Renaming only changes the file name , not the file contents. The goal is to restore the correct sequence so WinRAR can detect the next volume.

  1. Go to the folder where all the RAR files are saved.
  2. Make sure all parts of the archive are present and stored in the same folder .
  3. Check how the parts are currently named . Common patterns include:
file.part1.rar, file.part2.rar, file.part3.rar
file.rar, file.r01, file.r02, file.r03
  1. Look for files that don’t match the expected numbering pattern (for example, file.part01.rar , file.part1(1).rar , or unrelated names).
  2. Rename each file so it follows the same order without extra characters or mismatched numbering. Example:
Incorrect: file.part1.rar, file.part3.rar, file.part2(1).rar
Correct: file.part1.rar, file.part2.rar, file.part3.rar
  1. Make sure the text before the number is exactly the same for all files.
  2. Only the last part number should change.
  3. Right-click the first file in the series (usually part1.rar or the main .rar file) and select Extract Here .
  4. WinRAR should now recognize the sequence and continue extraction normally .

If you still get the same prompt: the archive set is likely incomplete (a part was never downloaded or was removed), or one of the volumes is corrupt and must be re-downloaded from the original source.