Fix: Msi True Color Not Working

MSI True Color represents a graphics technology related to color precision and quality and it enables you to set various color settings to make gaming or any other graphics-related activity more pleasant to the eye.

However, various users have reported that a Windows 10 update actually caused MSI True Color to suddenly stop working. After the tool is launched by double-clicking, it proceeds to open and launch but it suddenly disappears after a few seconds. There are various methods used to resolve the problem so make sure you follow the instructions we have prepared below! Good luck.

What Causes MSI True Color to Stop Working?

Since MSI True Color is not used by that many people, there are not many forum entries where people discuss what caused the problem for them. Therefore, there aren’t many confirmed causes which also narrows down the list for potential methods used to resolve it.

Here is a list of confirmed problems which trigger MSI True Color and cause it to stop launching:

• A recent update to your operating system or your graphics driver (or both) was reported to be the culprit by many users. Since it’s easier to roll back the driver and try out an older version, it’s the best way of successfully resolving the problem in many cases.
• A new version of the tool was launched which fixes the problem but the tool fails to update automatically and you will have to do it manually starting off by uninstalling the current version and locating the appropriate version for your setup.

Precaution: Disconnect Your External Display

MSI’s documentation for proper installing and use of MSI True Color states that any external displays should be displayed during the installing process. Some users try to reinstall MSI True Color but fail to do so because of this. Make sure your external display stays disconnected during the installing process.

Solution 1: Restore to an Older Graphics Card Driver

Since Windows 10 sometimes automatically updates some of your drivers when a new version of the OS is installed, users have reported that the newest graphics card driver was the culprit to blame and they suggested that restoring an earlier version actually helped them troubleshoot. Since the problem is usually handled in the next update, this can be a good temporary method in order to get it to work.

1. Click the Start menu button, type in “ Device Manager ” afterward, and select it from the list of available results by simply clicking the first one. You can also tap the Windows Key + R key combo in order to bring up the Run dialog box. Type in “ devmgmt.msc ” in the dialog box and click OK in order to run it.

Running Device Manager via Run dialog box

1. Since it’s the video card driver you want to update on your computer, expand the Display adapters section, right click on your graphics card and choose the Uninstall Device

Uninstalling the display adapter’s driver

1. Confirm any dialogues or prompts which may ask you to confirm the uninstallation of the current graphics device driver and wait for the process to complete.
2. Look for your graphics card driver on NVIDIA’s or AMD’s Input the required information about the card and your operating system and click on Search .

Searching for drivers on NVIDIA’s website

1. A list of all available drivers should appear. Make sure you scroll down until you reach the required entry, click on its name and the Download button afterwards. Save it to your computer, open it, and follow the instructions on-screen in order to install it. Check to see if MSI True Color works now!

Alternative: Rollback the Driver

For those who feel uncomfortable looking for the drivers themselves as it can be confusing for casual users since you need to input info about your computer and search through many different drivers and install them manually, there is an alternative. It involved rolling back the graphics card driver.

This process will look for backup files of the driver which was installed before the most recent updates and that driver will be installed instead. This option is not always available but this will definitely be easier as it works both for NVIDIA or AMD users:

1. First of all, you will need to uninstall the driver you currently have installed on your machine.
2. Type “Device Manager ” into the search field next to the Start menu button to open the device manager window. You can also use the Windows Key + R key combination in order to open the Run dialog box. Type devmgmt.msc in the box and click OK or Enter key.

Running Device Manager via Run dialog box

1. Expand the “ Display Adapters ” section. This will display all network adapters that the machine has installed at the moment.
2. Right click on the display adapter you want to rollback and select Properties . After the Properties window opens, navigate to the Driver tab and locate the Roll Back Driver

Rolling back the graphics card driver

1. If the option is grayed out, it means that the device wasn’t updated recently or it has no backup files remembering the old driver.
2. If the option is available to click on, do so and follow the instructions on-screen to proceed with the process. Restart the computer and check to see if the problem still occurs with MSI True Color.

Solution 2: Install the Latest Version of MSI True Color Manually

After the problematic Windows 10 update was released, there were plenty of new versions of the tool available. Since the tool has malfunctioned and it won’t even launch properly, the best thing you can do is to actually install the latest version manually by uninstalling it from your computer and installing the latest version from the site!

1. Click on the Start menu and open Control Panel by searching for it. Alternatively, you can click on the gear icon in order to open settings if you are using Windows 10.
2. In Control Panel, select to View as: Category at the top right corner and click on Uninstall a Program under the Programs section.

Uninstall a program in Control Panel

1. If you are using the Settings app, clicking on Apps should immediately open a list of all installed programs on your PC.
2. Locate MSI True Color tool in Control Panel or Settings and click on Uninstall .
3. Its uninstall wizard should open so follow the instructions to uninstall it.

Uninstalling MSI True Color

1. Click Finish when the uninstaller completes the process and restart your computer in order to continue to install the latest version. Visit this link and navigate under the Select Your Product screen in order to search for your laptop or Desktop computer.
2. Enter all relevant information about your setup until you reach the support page for your device. Click the Download button at the left-side menu and navigate to the Utility Scroll down until you reach the MSI True Color entry.

Downloading MSI True Color

1. Click the red download icon next to its name in order to initiate the downloading process. Locate the file in the Downloads folder, right-click on it, and choose to Extract. Run the installer and follow the instructions on-screen. Check to see if the problem persists.

How to Fix “Printer is in an error state” Issue?

The error “ WinRAR Error: Next Volume Is Required ” usually appears when you’re extracting a multi-part RAR archive and WinRAR can’t find (or can’t correctly identify) the next file in the sequence . This often happens when a volume is missing , stored in a different folder , or renamed in a way that breaks the archive’s expected order .

In this guide, we’ll go over the most reliable fixes confirmed by affected users, along with what each method is doing behind the scenes so you can choose the right one for your situation.

Important: To extract multi-volume archives, you should always start extraction from the first file in the set. This is usually file.part1.rar , or (in older sets) the main .rar file that comes before .r01 , .r02 , and so on.

1. Download and Place the Missing RAR File

WinRAR needs all parts of a multi-volume archive to complete extraction. This error usually appears when one of the volumes in a set like .part2.rar , .r01 , .r02 , .001 , and similar naming formats is missing . Downloading the missing volume and placing it in the same folder as the other parts allows WinRAR to continue extracting normally .

1. Look at the error message or review the list of archive parts in the folder.
2. Identify which volume is missing (for example, part2.rar , .r02 , .001 , etc.).
3. Go back to the website or source where you downloaded the archive.
4. Locate and download the exact missing file using the same naming format as the others.
5. Make sure the new file name matches the pattern of the rest. Example: If you have file.part1.rar and file.part3.rar , the missing one must be file.part2.rar .
6. Move the downloaded missing volume into the same folder as the other archive parts.
7. Confirm that all parts are in a single folder before extracting.
8. Right-click the first file in the series (usually part1 or the main .rar file) and select Extract Here or Extract to Folder .
9. WinRAR should now detect all volumes and continue extraction normally .

2. Manually Browse & Select the Next Volume

Use this method only if the next volume already exists , but WinRAR is failing to detect it automatically. This can happen due to incorrect naming , the file being in a different location , or a temporary file access issue. Manually browsing helps WinRAR locate the correct volume and resume extraction without interruption .

1. Right-click the first file in the series (usually .rar or part1.rar ) and select Extract Here or Extract to Folder .
2. When WinRAR cannot find the next volume, it will show the “ Next Volume Is Required ” message.
3. A small window will appear, allowing you to manually select the next volume .
4. Use the file explorer window to locate the folder where the other archive parts are saved.
5. Select the next part based on the naming order (example: select file.part2.rar after file.part1.rar ).
6. Make sure the selected file matches the naming format of the archive (no extra characters like (1) and no mismatched numbering).
7. WinRAR will resume extraction using the selected volume .
8. If additional volumes are missing or stored separately, WinRAR may prompt you again. Repeat the same process until extraction completes.

3. Rename the RAR files in Order

WinRAR relies on a proper naming sequence (such as file.part1.rar , file.part2.rar , file.part3.rar ) to extract multi-volume archives. If a file is named incorrectly, contains extra characters, or is out of order, WinRAR may fail to locate the next volume and show this error. Renaming the files correctly helps WinRAR follow the sequence and extract the archive without interruptions .

Note: Renaming only changes the file name , not the file contents. The goal is to restore the correct sequence so WinRAR can detect the next volume.

1. Go to the folder where all the RAR files are saved.
2. Make sure all parts of the archive are present and stored in the same folder .
3. Check how the parts are currently named . Common patterns include:

file.part1.rar, file.part2.rar, file.part3.rar
file.rar, file.r01, file.r02, file.r03

1. Look for files that don’t match the expected numbering pattern (for example, file.part01.rar , file.part1(1).rar , or unrelated names).
2. Rename each file so it follows the same order without extra characters or mismatched numbering. Example:

Incorrect: file.part1.rar, file.part3.rar, file.part2(1).rar
Correct: file.part1.rar, file.part2.rar, file.part3.rar

1. Make sure the text before the number is exactly the same for all files.
2. Only the last part number should change.
3. Right-click the first file in the series (usually part1.rar or the main .rar file) and select Extract Here .
4. WinRAR should now recognize the sequence and continue extraction normally .

If you still get the same prompt: the archive set is likely incomplete (a part was never downloaded or was removed), or one of the volumes is corrupt and must be re-downloaded from the original source.