Fix: Epsxe Has Stopped Working

ePSXe is a PS2 simulator available for Windows and it’s often mentioned as one of the best emulators available for Windows. However, some users (mostly Windows 10 users) have reported that the program started to crash each time a game was run displaying the “ ePSXe.exe has stopped working ” error message afterward.

ePSXe has Stopped Working

The problem wasn’t exactly resolved by later patches to the program and it’s still available in the latest version. There have been some fairly successful methods mentioned by users which have worked for them in their scenario. Try them out below and check out if this resolved your problem.

What Causes ePSXe to Stop Working?

ePSXe is crashing for several reasons which sometimes include quite basic fixes and sometimes include some more advanced troubleshooting. Check out the full list below:

• The CPU overclock option is set to more than x1 for users who haven’t overclocked their CPUs. It’s weird that the program would automatically set this option to something other than x1 but it causes ePSXe to crash and it should be changed.
• Graphics drivers are also a common cause of the problem which was to be expected. Sometimes the problem is caused by outdated drivers but more often it’s the case of the newly installed driver which don’t fully support the program.
• Since the problem occurs almost exclusively to Windows 10 users, you should try running it in compatibility mode for Windows 7.
• It’s quite possible that the problem required administrator permissions in order to run properly so make sure you grant them.

Solution 1: Setting CPU Overclock to x1

This is probably the best-known method for resolving this problem and it’s suggested in numerous forum posts and videos across the Internet. It can be used to easily resolve the problem triggered when the CPU overclocking option available from the in-app menu is set to a value larger than x1.

It’s not known just why this is set up as default and many users had their fair share of problems when troubleshooting this problem but the method is well-known know so make sure you try it out.

1. Locate the ePSXe main executable and double-click it in order to run it. Alternatively, you can search for it in the Start menu.
2. After the emulator window opens, click the Options button in the menu bar and navigate your mouse towards the CPU overclocking entry.

Setting CPU overclock to x1

1. Make sure you check the x1 option by clicking on it. Check to see if the problem still appears!

Solution 2: Install the Latest Driver or Roll Back the most Recent one

Since Windows 10 sometimes automatically updates some of your drivers when a new version of the OS is installed, users have reported that the newest graphics card driver was the culprit to blame and they suggested that restoring an earlier version actually helped them troubleshoot. Also, if the drivers haven’t been updated recently, it’s good to look for an update!

1. Click the Start menu button, type in “ Device Manager ” afterward, and select it from the list of available results by simply clicking the first one. You can also tap the Windows Key + R key combo in order to bring up the Run dialog box. Type in “ devmgmt.msc ” in the dialog box and click OK in order to run it.

Running Device Manager

1. Since it’s the video card driver you want to update on your computer, expand the Display adapters section, right click on your graphics card and choose the Uninstall Device

Uninstalling the graphics card driver

1. Confirm any dialogues or prompts which may ask you to confirm the uninstallation of the current graphics device driver and wait for the process to complete.
2. Look for your graphics card driver on NVIDIA’s or AMD’s Input the required information about the card and your operating system and click on Search .

Searching for drivers on NVIDIA’s official site

1. A list of all available drivers should appear. Make sure you scroll down until you reach the required entry, click on its name and the Download button afterward. Save it to your computer, open it, and follow the instructions on-screen in order to install it. Check to see if ePSXe keeps crashing!

Alternative: Rollback the Driver

For those who feel uncomfortable looking for the drivers themselves as it can be confusing for casual users since you need to input info about your computer and search through many different drivers and install them manually, there is an alternative. It involved rolling back the graphics card driver.

This process will look for backup files of the driver which was installed before the most recent updates and that driver will be installed instead. This option is not always available but this will definitely be easier as it works both for NVIDIA or AMD users:

1. First of all, you will need to uninstall the driver you currently have installed on your machine.
2. Type “Device Manager ” into the search field next to the Start menu button to open the device manager window. You can also use the Windows Key + R key combination in order to open the Run dialog box. Type devmgmt.msc in the box and click OK or Enter key.

Running Device Manager

1. Expand the “ Display Adapters ” section. This will display all network adapters that the machine has installed at the moment.
2. Right click on the display adapter you want to rollback and select Properties . After the Properties window opens, navigate to the Driver tab and locate the Roll Back Driver

Rolling back the driver

1. If the option is grayed out, it means that the device wasn’t updated recently or it has no backup files remembering the old driver.
2. If the option is available to click on, do so and follow the instructions on-screen to proceed with the process. Restart the computer and check to see if the problem still occurs ePSXe!

Solution 3: Runing as Administrator and in Compatibility Mode

Finally, you may simply try to force it to run with administrator permissions as it worked out for some people. Also, since Windows 7 doesn’t usually complain about this problem at all, you should try and check whether running the executable in compatibility mode for Windows 7 resolved the problem!

1. Locate the ePSXe.exe file and change its properties by right-clicking its entry either on the Desktop, the Start menu or the Search results window and choose Properties . Navigate to the Compatibility tab in the Properties window and check the box next to the Run this program as an administrator .

Running a program as an administrator

1. Under the Compatibility mode section, check the box next to the Run this program in compatibility mode for option and choose Windows 7 from the drop-down list before accepting the changes.
2. Make sure you confirm any dialogs which may appear for you to confirm with admin privileges and ePSXe should launch with admin privileges from now on. Open it by double-clicking its icon and try to see if the error still appears.

How to Fix “Printer is in an error state” Issue?

The error “ WinRAR Error: Next Volume Is Required ” usually appears when you’re extracting a multi-part RAR archive and WinRAR can’t find (or can’t correctly identify) the next file in the sequence . This often happens when a volume is missing , stored in a different folder , or renamed in a way that breaks the archive’s expected order .

In this guide, we’ll go over the most reliable fixes confirmed by affected users, along with what each method is doing behind the scenes so you can choose the right one for your situation.

Important: To extract multi-volume archives, you should always start extraction from the first file in the set. This is usually file.part1.rar , or (in older sets) the main .rar file that comes before .r01 , .r02 , and so on.

1. Download and Place the Missing RAR File

WinRAR needs all parts of a multi-volume archive to complete extraction. This error usually appears when one of the volumes in a set like .part2.rar , .r01 , .r02 , .001 , and similar naming formats is missing . Downloading the missing volume and placing it in the same folder as the other parts allows WinRAR to continue extracting normally .

1. Look at the error message or review the list of archive parts in the folder.
2. Identify which volume is missing (for example, part2.rar , .r02 , .001 , etc.).
3. Go back to the website or source where you downloaded the archive.
4. Locate and download the exact missing file using the same naming format as the others.
5. Make sure the new file name matches the pattern of the rest. Example: If you have file.part1.rar and file.part3.rar , the missing one must be file.part2.rar .
6. Move the downloaded missing volume into the same folder as the other archive parts.
7. Confirm that all parts are in a single folder before extracting.
8. Right-click the first file in the series (usually part1 or the main .rar file) and select Extract Here or Extract to Folder .
9. WinRAR should now detect all volumes and continue extraction normally .

2. Manually Browse & Select the Next Volume

Use this method only if the next volume already exists , but WinRAR is failing to detect it automatically. This can happen due to incorrect naming , the file being in a different location , or a temporary file access issue. Manually browsing helps WinRAR locate the correct volume and resume extraction without interruption .

1. Right-click the first file in the series (usually .rar or part1.rar ) and select Extract Here or Extract to Folder .
2. When WinRAR cannot find the next volume, it will show the “ Next Volume Is Required ” message.
3. A small window will appear, allowing you to manually select the next volume .
4. Use the file explorer window to locate the folder where the other archive parts are saved.
5. Select the next part based on the naming order (example: select file.part2.rar after file.part1.rar ).
6. Make sure the selected file matches the naming format of the archive (no extra characters like (1) and no mismatched numbering).
7. WinRAR will resume extraction using the selected volume .
8. If additional volumes are missing or stored separately, WinRAR may prompt you again. Repeat the same process until extraction completes.

3. Rename the RAR files in Order

WinRAR relies on a proper naming sequence (such as file.part1.rar , file.part2.rar , file.part3.rar ) to extract multi-volume archives. If a file is named incorrectly, contains extra characters, or is out of order, WinRAR may fail to locate the next volume and show this error. Renaming the files correctly helps WinRAR follow the sequence and extract the archive without interruptions .

Note: Renaming only changes the file name , not the file contents. The goal is to restore the correct sequence so WinRAR can detect the next volume.

1. Go to the folder where all the RAR files are saved.
2. Make sure all parts of the archive are present and stored in the same folder .
3. Check how the parts are currently named . Common patterns include:

file.part1.rar, file.part2.rar, file.part3.rar
file.rar, file.r01, file.r02, file.r03

1. Look for files that don’t match the expected numbering pattern (for example, file.part01.rar , file.part1(1).rar , or unrelated names).
2. Rename each file so it follows the same order without extra characters or mismatched numbering. Example:

Incorrect: file.part1.rar, file.part3.rar, file.part2(1).rar
Correct: file.part1.rar, file.part2.rar, file.part3.rar

1. Make sure the text before the number is exactly the same for all files.
2. Only the last part number should change.
3. Right-click the first file in the series (usually part1.rar or the main .rar file) and select Extract Here .
4. WinRAR should now recognize the sequence and continue extraction normally .

If you still get the same prompt: the archive set is likely incomplete (a part was never downloaded or was removed), or one of the volumes is corrupt and must be re-downloaded from the original source.