The “Compile error in hidden module” error occurs when you open a VBA project in Microsoft Excel . It occurs when a module used in the project is hidden or protected or if the code written in Microsoft Excel is not targeting your application’s architecture. For instance, the excel file you are trying to open is targeting a 32-bit application, but you are trying to open it in a 64-bit version.

Compile error in hidden module error - 1

Microsoft Excel VBA Compile in hidden module error

In this guide, we’ll provide instructions on how to fix this error.

Solution 1: Unprotect the VBA code module

If you are an owner and have access to the VBA code, then unprotect the module and check if the error persists. To unprotect the module, follow these steps:

  1. Open Microsoft Excel, click on the Developer tab from the top, and then click Visual Basic from the left. Opening Visual Basic on MS Excel
  2. If you don’t see a Developer option on the top, click on File and select Options from the left pane. Navigating to Options
  3. Click on Customize Ribbon from the left pane.
  4. Under the Main Tabs, tick Developer and click OK to save the changes. Enabling Developer option
  5. Now click on Developer and Visual Basic .
  6. Right-click the module you want to unprotect and then select VBAProject Properties . Opening module properties
  7. Go to Protection , remove the password, confirm the password, then click OK . Unprotecting module on MS excel
  8. Once done, now try to run the VBA code to check if the issue is fixed.

However, If you don’t have access, you’ll have to contact the owner of the Excel document to unprotect the VBA code.

Solution 2. Uncheck Missing References

Missing references in Microsoft Excel’s VBA Project can also cause “Compile error in hidden module” error. These references. These references are links to other modules or libraries , or external files (such as 2Dshape, FixDynamics object, ActiveX control), that the VBA code in your project relies on, but are not currently available.

  1. Open the VBA Excel, click on the Developer tab and then click Visual Basic to open the VBA editor.
  2. Click on Tools and click References from the options. Navigating to References on MS Excel
  3. Now find the references that start with the Missing word.
  4. If you find them, uncheck them one by one and click OK . Finding References with the starting word Missing
  5. Once done, check if the error is fixed.

Solution 3. Deselect Excel Add-ins

Third-party excel add-ins can enhance functionality of Excel. However, if these add-ins are incompatible with the VBA project you are opening they will cause compile error in modules. Therefore, to make sure there isn’t any Excel add-in interfering with our VBA project, disable them and test opening your VBA project again.

  1. To do so, open the Excel application, click on the Developer tab and then click on Excel Add-ins . Opening Excel Add-ins Window
  2. Here uncheck the excel add-ins that you think are unnecessary. Unchecking unnecessary excel add-ins
  3. Then, try to run the VBA code to check if the issue persists.

Solution 4. Install Correct Architecture of Microsoft Excel

If the error persists, ensure your VBA code does not contain any mistakes. If you are sure there is no mistake in your code, you can finally try installing the latest version of Microsoft Excel. If you are trying to open a file written in a 32-bit version, download the 32-bit excel version to avoid this error.

How to Fix “Printer is in an error state” Issue?

The error “ WinRAR Error: Next Volume Is Required ” usually appears when you’re extracting a multi-part RAR archive and WinRAR can’t find (or can’t correctly identify) the next file in the sequence . This often happens when a volume is missing , stored in a different folder , or renamed in a way that breaks the archive’s expected order .

Fix: Compile Error in Hidden Module in Microsoft Excel VBA - 2

In this guide, we’ll go over the most reliable fixes confirmed by affected users, along with what each method is doing behind the scenes so you can choose the right one for your situation.

Important: To extract multi-volume archives, you should always start extraction from the first file in the set. This is usually file.part1.rar , or (in older sets) the main .rar file that comes before .r01 , .r02 , and so on.

1. Download and Place the Missing RAR File

WinRAR needs all parts of a multi-volume archive to complete extraction. This error usually appears when one of the volumes in a set like .part2.rar , .r01 , .r02 , .001 , and similar naming formats is missing . Downloading the missing volume and placing it in the same folder as the other parts allows WinRAR to continue extracting normally .

  1. Look at the error message or review the list of archive parts in the folder.
  2. Identify which volume is missing (for example, part2.rar , .r02 , .001 , etc.).
  3. Go back to the website or source where you downloaded the archive.
  4. Locate and download the exact missing file using the same naming format as the others.
  5. Make sure the new file name matches the pattern of the rest. Example: If you have file.part1.rar and file.part3.rar , the missing one must be file.part2.rar .
  6. Move the downloaded missing volume into the same folder as the other archive parts.
  7. Confirm that all parts are in a single folder before extracting.
  8. Right-click the first file in the series (usually part1 or the main .rar file) and select Extract Here or Extract to Folder .
  9. WinRAR should now detect all volumes and continue extraction normally .

2. Manually Browse & Select the Next Volume

Use this method only if the next volume already exists , but WinRAR is failing to detect it automatically. This can happen due to incorrect naming , the file being in a different location , or a temporary file access issue. Manually browsing helps WinRAR locate the correct volume and resume extraction without interruption .

  1. Right-click the first file in the series (usually .rar or part1.rar ) and select Extract Here or Extract to Folder .
  2. When WinRAR cannot find the next volume, it will show the “ Next Volume Is Required ” message.
  3. A small window will appear, allowing you to manually select the next volume .
  4. Use the file explorer window to locate the folder where the other archive parts are saved.
  5. Select the next part based on the naming order (example: select file.part2.rar after file.part1.rar ).
  6. Make sure the selected file matches the naming format of the archive (no extra characters like (1) and no mismatched numbering).
  7. WinRAR will resume extraction using the selected volume .
  8. If additional volumes are missing or stored separately, WinRAR may prompt you again. Repeat the same process until extraction completes.

3. Rename the RAR files in Order

WinRAR relies on a proper naming sequence (such as file.part1.rar , file.part2.rar , file.part3.rar ) to extract multi-volume archives. If a file is named incorrectly, contains extra characters, or is out of order, WinRAR may fail to locate the next volume and show this error. Renaming the files correctly helps WinRAR follow the sequence and extract the archive without interruptions .

Note: Renaming only changes the file name , not the file contents. The goal is to restore the correct sequence so WinRAR can detect the next volume.

  1. Go to the folder where all the RAR files are saved.
  2. Make sure all parts of the archive are present and stored in the same folder .
  3. Check how the parts are currently named . Common patterns include:
file.part1.rar, file.part2.rar, file.part3.rar
file.rar, file.r01, file.r02, file.r03
  1. Look for files that don’t match the expected numbering pattern (for example, file.part01.rar , file.part1(1).rar , or unrelated names).
  2. Rename each file so it follows the same order without extra characters or mismatched numbering. Example:
Incorrect: file.part1.rar, file.part3.rar, file.part2(1).rar
Correct: file.part1.rar, file.part2.rar, file.part3.rar
  1. Make sure the text before the number is exactly the same for all files.
  2. Only the last part number should change.
  3. Right-click the first file in the series (usually part1.rar or the main .rar file) and select Extract Here .
  4. WinRAR should now recognize the sequence and continue extraction normally .

If you still get the same prompt: the archive set is likely incomplete (a part was never downloaded or was removed), or one of the volumes is corrupt and must be re-downloaded from the original source.