Fix: “Cannot Load File Wilcomemul.Dll Error 59” In Wilcom Embroidery Studio

The “WilcomEmul.dll:59” error is specific to this software as it relates to its licensing system (HASP drivers) and the WilcomEmul.dll file, which is essential for operating the Embroidery Studio program.

There are several solutions to resolve this issue, and you can try them one by one.

1. Update HASP Drivers

HASP stands for Hardware Against Software Privacy , and it is a protection system that uses a physical USB dongle or a virtual key, also known as a Physical Key. The software checks for license validation, which is essentially a way to protect the software from unauthorized use and ensure only licensed users can access it. When the dongle isn’t plugged in or the driver is not functional, it can cause the error “ Cannot load file WilcomEmul.dll error 59 “.

The image contains an older date, but you can download the latest version from the website.

To fix it, you can visit the official website and download the drivers again. The process is clearly outlined step by step on their official website.

2. Reinstall Wilcom Embroidery Studio

Sometimes, third-party tools such as CCleaner or other cache-clearing tools can mistakenly delete required files. Uninstalling and reinstalling Wilcom Embroidery Studio can fix any corrupted or incomplete installations. Be sure to download the latest version from the official Wilcom website to ensure everything is up to date.

1. First, uninstall the software. Open the Control Panel by pressing Windows + S and searching for Control Panel.
2. Once you open the Control Panel, look for Programs and click on it.
3. Now, in the Programs section, find the Uninstall a program link and click on it. Uninstall a Program
4. Find your software in the list and right-click on it. This image is for demonstration. You need to find the exact software called “Embroidery Studio”, right-click, and uninstall it.
5. Click on Uninstall.

After uninstalling it properly, restart your PC once to make sure everything is removed correctly. Now it’s time to reinstall it from the official website.

1. Visit the official website .
2. Click on the download button to download it.
3. Once the download finishes, install it on your PC.
4. After installation, relaunch it.

3. Perform a System Restore

Sometimes, after updating, Windows can cause different types of errors. If that’s the case, performing a system restore could resolve any compatibility issues. Rolling back your system to a previous state can fix the problem. Use the built-in System Restore tool in Windows to revert your system.

1. Press Win + S , search for Create a restore point , and open it. Search for create a restore point
2. In the System Properties window, find the System Restore button and click on it.
3. Review the time and description of the Recommended Restore point. If it fits your requirements, proceed with it. Otherwise, click on Choose a different restore point and click Next.
4. Find the date and time when your software was working fine, select it, and click Next.

Wait for the process to finish and follow any prompts that appear on your screen. This should restore your PC to a working state and hopefully fix the issue.

4. Install Microsoft Visual C++ Redistributable

Missing or outdated Microsoft Visual C++ Redistributables are another potential cause for DLL errors like yours. To fix this, install both the 32-bit and 64-bit versions of the Redistributable, particularly the versions for 2013 and 2015-2022.

1. Microsoft Visual C++ Redistributable 2013 Microsoft Visual C++ Redistributable 2015 Microsoft Visual C++ Redistributable 2022

If you’re facing any difficulties, please visit Appuals.com anytime. Good luck!

How to Fix “Printer is in an error state” Issue?

The error “ WinRAR Error: Next Volume Is Required ” usually appears when you’re extracting a multi-part RAR archive and WinRAR can’t find (or can’t correctly identify) the next file in the sequence . This often happens when a volume is missing , stored in a different folder , or renamed in a way that breaks the archive’s expected order .

In this guide, we’ll go over the most reliable fixes confirmed by affected users, along with what each method is doing behind the scenes so you can choose the right one for your situation.

Important: To extract multi-volume archives, you should always start extraction from the first file in the set. This is usually file.part1.rar , or (in older sets) the main .rar file that comes before .r01 , .r02 , and so on.

1. Download and Place the Missing RAR File

WinRAR needs all parts of a multi-volume archive to complete extraction. This error usually appears when one of the volumes in a set like .part2.rar , .r01 , .r02 , .001 , and similar naming formats is missing . Downloading the missing volume and placing it in the same folder as the other parts allows WinRAR to continue extracting normally .

1. Look at the error message or review the list of archive parts in the folder.
2. Identify which volume is missing (for example, part2.rar , .r02 , .001 , etc.).
3. Go back to the website or source where you downloaded the archive.
4. Locate and download the exact missing file using the same naming format as the others.
5. Make sure the new file name matches the pattern of the rest. Example: If you have file.part1.rar and file.part3.rar , the missing one must be file.part2.rar .
6. Move the downloaded missing volume into the same folder as the other archive parts.
7. Confirm that all parts are in a single folder before extracting.
8. Right-click the first file in the series (usually part1 or the main .rar file) and select Extract Here or Extract to Folder .
9. WinRAR should now detect all volumes and continue extraction normally .

2. Manually Browse & Select the Next Volume

Use this method only if the next volume already exists , but WinRAR is failing to detect it automatically. This can happen due to incorrect naming , the file being in a different location , or a temporary file access issue. Manually browsing helps WinRAR locate the correct volume and resume extraction without interruption .

1. Right-click the first file in the series (usually .rar or part1.rar ) and select Extract Here or Extract to Folder .
2. When WinRAR cannot find the next volume, it will show the “ Next Volume Is Required ” message.
3. A small window will appear, allowing you to manually select the next volume .
4. Use the file explorer window to locate the folder where the other archive parts are saved.
5. Select the next part based on the naming order (example: select file.part2.rar after file.part1.rar ).
6. Make sure the selected file matches the naming format of the archive (no extra characters like (1) and no mismatched numbering).
7. WinRAR will resume extraction using the selected volume .
8. If additional volumes are missing or stored separately, WinRAR may prompt you again. Repeat the same process until extraction completes.

3. Rename the RAR files in Order

WinRAR relies on a proper naming sequence (such as file.part1.rar , file.part2.rar , file.part3.rar ) to extract multi-volume archives. If a file is named incorrectly, contains extra characters, or is out of order, WinRAR may fail to locate the next volume and show this error. Renaming the files correctly helps WinRAR follow the sequence and extract the archive without interruptions .

Note: Renaming only changes the file name , not the file contents. The goal is to restore the correct sequence so WinRAR can detect the next volume.

1. Go to the folder where all the RAR files are saved.
2. Make sure all parts of the archive are present and stored in the same folder .
3. Check how the parts are currently named . Common patterns include:

file.part1.rar, file.part2.rar, file.part3.rar
file.rar, file.r01, file.r02, file.r03

1. Look for files that don’t match the expected numbering pattern (for example, file.part01.rar , file.part1(1).rar , or unrelated names).
2. Rename each file so it follows the same order without extra characters or mismatched numbering. Example:

Incorrect: file.part1.rar, file.part3.rar, file.part2(1).rar
Correct: file.part1.rar, file.part2.rar, file.part3.rar

1. Make sure the text before the number is exactly the same for all files.
2. Only the last part number should change.
3. Right-click the first file in the series (usually part1.rar or the main .rar file) and select Extract Here .
4. WinRAR should now recognize the sequence and continue extraction normally .

If you still get the same prompt: the archive set is likely incomplete (a part was never downloaded or was removed), or one of the volumes is corrupt and must be re-downloaded from the original source.